MECHANICAL
MECHANICAL PROJECTS
WE ALSO OFFER MECHANICAL PROJECTS IN BEST QUALITY AND LESS PRICE. OUR PROJECTS ARE MAINLY FOCUSED ON CURRENT ADVANCEMENTS IN MECHANICAL FIELD. THE PROJECTS HAS BEEN DEVISED FROM INDUSTRIAL RELATED PROBLEMS. THE PROFESSIONALS FROM VARIOUS FIELDS ARE WORKING IN OUR CONCERN WHO CAN ADAPT VARIOUS SOLUTIONS FOR PROBLEMS FACED IN MECHANICAL INDUSTRIES.
FINAL YEAR PROJECTS FOR MECHANICAL STUDENTS
MECHANICAL PROJECTS
- Design And Optimization Of Turn dish Apparatus
DESCRIPTION
o In turn dish apparatus used in the furnace industry the vortex formation has been reduced by the advanced design using optimization tool and compared with the existing model.
- Reduction Of Drag In A Buggy Car Model
DESCRIPTION:
o Optimizing the off road cars for better performance and specific fuel consumption reduction by improving the external aerodynamics.
- Design And Optimization Of Flow Field In Muffler
DESCRIPTION:
o Comparison of various muffler design for both thermal and static structural stress at working condition and suggesting an best innovative design for the automobiles.
- Optimization Of Flow Around The Wind-Mill Tower
DESCRIPTION:
o Replacing the circular wind mill tower by an optimized new design tower which can reduce drag due to environmental condition and increase the life of the tower.
- Design And Optimization Of Flow Field In Heat Exchanger
DESCRIPTION:
o Increasing the efficiency of the heat exchanger by changing various configuration of design using the thermal optimization tool. And compared with the existing heat exchanger.
- Reduction Of Nox In Catalytic Converter
DESCRIPTION:
o Reduction of pollutants in catalytic converter to achieve Euro-5 norms and compared with that of the existing Euro-4 norms.
AUTOMATIC TEMPERATURE MAINTENANCE IN AUTOMOBILE CABIN
DESCRIPTION:
Cabin cooling in the automobiles especially in cars during summer season using innovative renewable technology resources.
Optimization in piston design for high speed piston engine.
DESCRIPTION:
In this project the piston design has been changed or modified using the optimization tools to get better result and life. the results has been compared with the existing design of piston for the thermal and structural loads.
RELATED PROJECTS:
- SYNTHESIS AND CONSOLIDATION OF NANO – CRYSTALLINE MATERIALS
- CONTROLLING THE SHELL CRACK REJECTION IN SHELL MOLDING PROCESS
- OPTIMIZATION OF WIND TURBINE BLADES
- OZONE DEPLETION BY REFRIGERATION CYCLE
- SOLAR POWER TRANSMISSION WITHOUT MEDIUM (HYPOTHETICAL)
- COMPOSITE MATERIALS FOR AIRCRAFT
- ABRASIVE JET MACHINING
- FAILURE PREDICTION OF FLUID STORAGE CYLINDER
- PATH WAY FOR BETTER EFFICIENCY IN DUST COLLECTOR
- POLLUTION PREDICTION TECHNIQUES IN CYCLONE SEPARATOR
- STRENGTH IMPROVEMENT TECHNIQUES IN MATERIALS
- SAFE LOADING PROCESS IN FUEL STORAGE DEVICE
-
TEMPERATURE MEASURING DEVICES FOR HIGH TEMPERATURE MEASUREMENT IN HIGH SPEED JET ENGINE TURBINE (HYPOTHETICAL)
-
FLUID FLOW PATH VISUALIZATION ON SPORTS CAR
- FLOW RESTRICTION IN WIND MILL TOWER AND REDUCING RESTRICTION TECHNIQUE
- INTERNAL COMBUSITON ENGINE’S EXHAUST NOISE REDUCTION
- HEAT TRANSFER OF VARIOUS FLUID FLOW VISUALIZATION IN HEAT EXCHANGER
- INTERNAL COMBUSTION ENGINE’S EXHAUST EMISSIONS CONTROL
MANIKANDAN
November 22, 2011 at 6:51 am
Can DO PROJECT FOR DEISGN ALSO AS WELL AS FEA ANALYSIS OF THE PROJECT?
IF U R GOING TO DO MEANS PLEASE SEND ME THE DETAILS OF THE PROJECTS ALSO.
LikeLike
aerostars
November 22, 2011 at 7:24 am
Yes sir, we are also doing like these type of projects what you are asking to us. We are doing fluid structure interaction like very very advanced innovative projects regarding aeronautical and mechanical related projects we are offering through our centre. For more details contact us.
Thank you,
With regards,
Aero Star Solutions
LikeLike
lavina
July 27, 2012 at 11:01 am
even i need the same thing..how to analyse in the fea softwer?
LikeLike
BALARAMAN
November 22, 2011 at 6:53 am
ARE U GOING TO DO PROJECT IN GEARS ALSO?
LikeLike
aerostars
November 22, 2011 at 7:08 am
yes sir, we also doing projects in all fields of mechanical and aeronautical related projects. Especially we are doing projects in structural analysis and computational fluid dynamics. From that we are giving training as well as we provide materials regarding that sir. We plan to do projects for all analytical oriented experimental projects. Depends on the projects we can suggest you to do projects.
Thank you,
With regards,
Aero Star Solutions.
LikeLike
sathish kumar
November 22, 2011 at 6:55 am
Can we have option to do projects in automobile or production also? Is anyone guide me for my BE final Year projects?
LikeLike
aerostars
November 22, 2011 at 7:03 am
Yes you have option to do projects in our centre. We offering aeronautical, mechanical, automobile, manufacturing, composite materials etc.,
In these category we are doing projects.Especially we are doing projects in structural analysis and computational fluid dynamics. As well as we are giving training to do that. if u have any other details means contact us through our mail id or mobile no.
Thank You,
With regards,
Aero Star Solutions.
LikeLike
gowrishankar
December 24, 2011 at 1:09 am
it`s is good but i need more information
LikeLike
aerostars
December 24, 2011 at 3:35 pm
THANKS FOR YOUR COMMENT I WILL UPLOAD MORE INFORMATION SOON.
LikeLike
novel.j.d
January 18, 2012 at 8:14 am
i want to do my final year mechanical projects in low cost plz inform me.
LikeLike
CHINMAY
February 14, 2012 at 7:57 am
I M A STUDENT OF MECHANICAL ENNG DIPLOMA … I WANT SOME MORE INFO ABOUT PROJECT WHICH CAN BE EASILY DONE AT HOME TOO WIILL U PLZ GIDE ME
LikeLike
aerostars
February 16, 2012 at 1:29 pm
thank you for your approach.
but we are not concentrating on experimental projects.
we are providing analysis projects along with hypothetical projects.
LikeLike
Mani
June 28, 2012 at 4:39 pm
sir,please help me in finding new idea for my final year mechanical engineering project,i requested to send a us a idea based on renewable energy automobile project
LikeLike
Pritesh k
July 5, 2012 at 11:03 am
i m final year degree student ..i m interested in doing a project related to thermal or refrigerator . so please guide me with some ideas…
LikeLike
Priyanka Gupta
July 13, 2012 at 4:06 pm
please guide me further for the details in the project of optimization Of Flow Around The Wind-Mill Tower i am supposed to submit the topic with details this week!
LikeLike
Priyanka Gupta
July 18, 2012 at 3:09 pm
please guide me further for the details in the project of optimization Of Flow Around The Wind-Mill Tower i am supposed to submit the topic with details this week!
LikeLike
karthick
July 19, 2012 at 11:49 am
we are searching for a topic on turbomachinery, for my b.tech final year project. can you please suggest any tppic relavent to it?
LikeLike
ROHIT GOYAL
August 7, 2012 at 3:17 pm
sir i am a B.Tech student of final year. i want to doing project on mechanical design so please
guide me . my email id is rohitgoyal.raaz@yahoo.in
LikeLike
rahul
October 14, 2012 at 7:32 am
MY FIRST Year student plese help me for any innovative project s….a suitable topic and can hav low and easy to make
LikeLike
PRASANNAKUMAR.V
October 15, 2012 at 8:36 am
sir, i am B.E student of final year mechanical.i want to project on composite material so please give me some suggest
LikeLike
Mr Alok MN
November 13, 2012 at 8:49 am
Hello guys, i’m the student of mech. engg. so, any of u hv the details about project “solar power transmission without medium” please help me. alok_nijalinge@rediffmail.com +919036058929
LikeLike
aerostars
December 2, 2012 at 8:32 pm
It is about how to transfer the power in space by converting into signals then again it has been received in other end as signal and then converted into
power.
LikeLike
rabindranath
December 7, 2012 at 6:50 am
dear sir,
are you going to do the project in the composite materials for driveshaft using design, analysis and fabrication?
if yes means please send the deatils to raben_s@yahoo.com
LikeLike
sameet
December 18, 2012 at 12:52 pm
hello sir,
i m sameet,btech first year student and very much intrested in innovative kind of projects
i m persuing mechanical engineering
can u suggest me some ideas to make an project…….not for exams but for enhanchments of my skill….waiting for ur reply……!
LikeLike
suresh
December 28, 2012 at 7:03 am
i am final year B.E student sir..i want to project on composite materials …so please give me some composite materials project topics with detailed explanation…..please sir
LikeLike
SESHASAI
December 29, 2012 at 3:14 am
dear sir ,
iam seshasai, b.tech final year student can u give me some ideas for topic selection for doing main project and also iam thinking to do project on HEAT EXCHANGERS what is ur suggestion.
LikeLike
Naresh Chary
January 1, 2013 at 6:12 am
NAERSH
sir,
iam naresh,studying b.tech final year,i want do project in the stream of automobiles and robotics with new innovations.plz sir can u suggest me.
LikeLike
rajesh
January 15, 2013 at 12:01 pm
sir ,
iam rajesh studying btech final year i need help in building a working model of active magnatic bearings,if u could help please send a mail to rjshchr@yahoo.co.in ,
LikeLike
dhatheshvar
January 25, 2013 at 4:10 pm
i need to do a mini project on electric lawn mover , can u help me out sir on this ??
My mail id is dhatheshvar@yahoo.in
LikeLike
Mehaboob Tahir
February 2, 2013 at 3:24 pm
hello sir.
i want a low cast project lest.and that project is use for college. plz send to my mail.
mehaboobtahir@gmail.com
LikeLike
arun jakhad
March 26, 2013 at 5:30 am
sir i wanted to make a project on bike. i wanted to use in that bike screen touch gear, can u give me some suggestion
LikeLike
Vinoth
July 12, 2013 at 6:06 am
Projects can be done in chennai ?
LikeLike
SANTHOSH
July 13, 2013 at 1:41 pm
THANX….
LikeLike
keval
August 8, 2013 at 9:23 am
i ma keval patil final year b.e mech student i want some new ideas for my last year project
so plz help me in that case
hope u give me some better ides
i m thinking of something innovative
LikeLike
karna patel
August 10, 2013 at 11:55 am
hello,sir i want to do CFD for optimization of automobile body shape with some new ideas to reduce drag over shape of car body so please guide us for that as soon as possible.
LikeLike
saumil
August 10, 2013 at 12:02 pm
sir, i want to make some modification in conventional design of piston for i.c engine and prove it via CFD analysis as you suggested on your website so please guide me for it.
LikeLike
Saumil
August 10, 2013 at 1:57 pm
Hello sir, I want to do automobile body shape optimization using CFD analysis,but i don’t know how to do so. Can you give some guidance & new possible ideas on that?
LikeLike
naganjaneya
August 30, 2013 at 12:45 pm
sir,iam finalyear b.tech mechanical,i do project with low cost in industry.plz suggest project and company..
LikeLike
ananthan
September 7, 2013 at 7:04 am
i ha ve an idea dat to make ma side stand of ma vehicle automatic can i do it as a project or u suggest sm thng else
LikeLike
shashi
September 7, 2013 at 5:12 pm
Hello sir, we are BE final year mechanical students,we want new project idea and details at low cost and also guide us..
LikeLike
Suresh Sundar
September 18, 2013 at 3:31 pm
sir,
I would like to do some fabrication projects..
can you help me…
LikeLike
Syam Kumar.V
December 5, 2013 at 11:55 am
Sir, I want to do project regarding thermal engineering field, can u suggest me innovative
ideas about the project.
LikeLike
rasekar
May 11, 2014 at 1:22 pm
hello sir, I like to do project in composite materials…… can you say some topics relted to composite materials?
LikeLike
aerostars
August 3, 2014 at 3:13 pm
Click to access aerostar-solutions.pdf
I have listed some project related composites in this above link.
LikeLike
Viswanathan
June 6, 2014 at 1:57 am
Sir,
I would like to work on CFD application in building ventilation. Could u pls give me some input on it.
LikeLike
aerostars
August 3, 2014 at 3:12 pm
What kind of input you need can you be specific.
LikeLike
praveen durai
July 10, 2014 at 5:57 pm
sir i am a final year EEE student give me some ideas for doing my project
LikeLike
nikesh
August 2, 2014 at 9:31 am
interested to do final year b.tech project on topics related to auto mobile or fluid (specially in heat exchanger). Can you provide good topics and a good guide for assisting us ?. Project group contain 6 members. Is that permissible ?
LikeLike
aerostars
August 3, 2014 at 2:57 pm
Pls let me know your contact details so that we can discuss in detail.
LikeLike
Atul Kumar Singh
November 5, 2014 at 5:34 am
Sir I perusing b.tech final year at mechanical engineering. So please help me for best projects.
LikeLike
Saurabh
November 11, 2014 at 6:22 am
sir i am a final year b.tech mechanical student. i want to build a project on automobile. how much it would cost to install a baloon system in car.
LikeLike
Nikhil jain
November 14, 2014 at 6:00 am
Hello sir,
I am a final year B.tech mechanical student. I am interested to do a project which is of low cost and come out from scratch. kindly suggest me some better option/topic from your experience and skills. I would we very thankful to you.
Name; Nikhil jain
Email: nikhiljain1969@gmail.com
LikeLike
JEGATHJOTHI T P
November 21, 2014 at 1:57 pm
r u interested to open branch office at madurai
LikeLike
aerostars
December 6, 2014 at 1:34 pm
Please our office bearers, Ph: 07204643788
LikeLike
muthu
December 8, 2014 at 6:53 pm
Sir can u do design and analysis project in mech engg.
List some topics for design and analysis..
LikeLike
abhishek
January 26, 2015 at 11:44 am
i want do some innovative kind of project…i want ur guidence.so plz rply me in this mail abhishek,abhi885@gmail.com or mobile. 8147838641
LikeLike
Eswaran
February 4, 2015 at 6:32 am
sir i am final year mechanical student can you some project topics for composite materials
LikeLike
Manish kumar
March 17, 2015 at 2:34 pm
sir i m final year mechanical student .i want to make my project on automobile so please suggest me any project with guide .
LikeLike
chandra shanker srivastava
March 21, 2015 at 6:28 am
I am an individual innovator and doing research from last 30 years on non
conventional energy resources, energy conservation and improvisation of
existing system. In this regard still I am working on my concepts and
developing new techniques for energy generation and its storage system. My
concept on energy generation is very unique, special and economic. In a
single system we can convert any type of movement into energy and store as
a fuel for a long time and transport it very easily. We can generate power
in huge quantity whenever and wherever we require.Pls. advice me where I will approach for execution on above project
LikeLike
chandra shanker srivastava
March 22, 2015 at 4:06 am
I have developed an energy storage system other then battery, developed an
ocean wave converter (O W C) on above storage system by which we can
convert the power of ocean wave with the help of gravity into energy and
stored it as fuel for further use . chandrashankars@gmail.com 91 9415051328
LikeLike
Jatin Malhotra
February 23, 2018 at 3:06 pm
I have an own idea for project can u do it
LikeLike
aerostars
July 7, 2018 at 7:27 pm
Please let us know in detail. Aerostarsolutions@gmail.com
LikeLike
Manoj
December 19, 2019 at 7:46 pm
I want more new ideas and display picture in that
LikeLike